FTM122: Torque Wrenching, Part 1
This edition of the Fastener Training Minute with Carmen Vertullo was originally published November 20, 2017 as “will using an
Author: Brian Musker
Posts by Brian Musker
FTM 121: ROCAP Testing
This edition of the Fastener Training Minute with Carmen Vertullo was originally published October 30, 2017 as “ROCAP Testing” during
FTM 120: Class 2A and Class 3A threads
This edition of the Fastener Training Minute with Carmen Vertullo was originally published September 28, 2017 as “the difference in
FTM 119: Hex Bolts and Hex Cap Screws
This edition of the Fastener Training Minute with Carmen Vertullo was originally published August 31, 2017, as “the difference between
FTM 118: How to Torque Bolted Joints
Does it make any difference in joint tightness if the tightening torque is applied to the bolt or the nut?
FTM 117: 3D Printing
This edition of the Fastener Training Minute with Carmen Vertullo was originally published June 15, 2017 as “3D Printing” during
FTM 116: Hydrogen Embrittlement
This edition of the Fastener Training Minute with Carmen Vertullo was originally published May 12, 2017 as “10 things you
FTM 115: Tension Control Bolts
This edition of the Fastener Training Minute with Carmen Vertullo was originally published April 13, 2017 as “installing and inspecting
FTM 114: Fully Threaded Metric
This edition of the Fastener Training Minute with Carmen Vertullo was originally published March 9, 2017 as “10 things you
FTM 113: The Effect of Plating on Thead Fit
This edition of the Fastener Training Minute with Carmen Vertullo was originally published February 9, 2017 as “The Effect of