This edition of the Fastener Training Minute with Carmen Vertullo was originally published September, 21st 2023 as “How to choose the correct thread-cutting tap for cutting a thread into a hole. Part 3” during episode 192 of Fully Threaded Radio. Well hello everyone, this is Carmen Vertullo with your Fastener Training Minute, coming to you from […]
Written by R.W. Baird analyst David J. Manthey, CFA with Quinn Fredrickson, CFA 9/8/23 Key Takeaway: The seasonally adjusted Fastener Distributor Index (FDI) surged to a neutral reading of 50.0 compared to 40.7 in July. Respondents pointed to a rebound in demand as customers returned from summer vacations (which had pressured the July FDI). The […]
This edition of the Fastener Training Minute with Carmen Vertullo was originally published August, 18th 2023 as “How do we choose the correct drill bits and taps if we are installing threaded inserts.” during episode 191 of Fully Threaded Radio. Well hello everyone, this is Carmen Vertullo with your Fastener Training Minute coming to you […]
Read More… from FTM 191 – Drilling and tapping for inserts, Part II
Written by R.W. Baird analyst David J. Manthey, CFA with Quinn Fredrickson, CFA 8/9/23 Key Takeaway: The seasonally adjusted Fastener Distributor Index (FDI) retreated to 40.7 compared to 45.6 in June. Respondents pointed to potential vacation/holiday noise and soft new orders (despite healthy quoting). The Forward-Looking Indicator (FLI) also regressed but very modestly off an […]
This edition of the Fastener Training Minute with Carmen Vertullo was originally published July, 20th 2023 as “Everything you ever wanted to know about blind rivets” during episode 190 of Fully Threaded Radio. Well hi everyone, this is Carmen Vertullo and the Fastener Training Institute with he Fastener Training Minute coming to you from Carver […]
Written by R.W. Baird analyst David J. Manthey, CFA with Quinn Fredrickson, CFA 7/12/23 Key Takeaway: The seasonally adjusted Fastener Distributor Index (FDI) rebounded slightly to 45.6 compared to 44.7 in May. Respondents pointed to increased quoting activity as the primary driver of the m/m improvement. The Forward-Looking Indicator (FLI) regressed slightly, moving further below […]
This edition of the Fastener Training Minute with Carmen Vertullo was originally published June, 22nd, 2023 as “Can you recover fasteners that have hydrogen embrittlement, and should you?” during episode 189 of Fully Threaded Radio. Well hi everybody, this is Carmen Vertullo with the Fastener Training Minute coming to you from the Fastener Training Institute […]
Read More… from FTM 189: Can we recover hydrogen embrittlement?
Written by R.W. Baird analyst David J. Manthey, CFA with Quinn Fredrickson, CFA 6/7/23 Key Takeaway: The seasonally adjusted Fastener Distributor Index (FDI) weakened further to 44.7 compared to 46.3 in April. Respondents pointed to declining new business opportunities and general softening in the economy as the driver of the m/m decline. The Forward-Looking Indicator […]
Written by R.W. Baird analyst David J. Manthey, CFA with Quinn Fredrickson, CFA 5/7/23 Key Takeaway: The seasonally adjusted Fastener Distributor Index (FDI) weakened further to 46.3 compared to 48.6 in March. Respondents indicated raw material shortages and declining prices/margins were the primary drags in April. The Forward-Looking Indicator (FLI) also softened to just 37.8 […]
This edition of the Fastener Training Minute with Carmen Vertullo was originally published April, 18th, 2023 as “We have a fastener, our ring gauge says it is OK, the customer’s ring gauge says it doesn’t conform. What do we do?” during episode 187 of Fully Threaded Radio. Well hi everybody, this is Carmen Vertullo with […]
Read More… from FTM 187: What happens when ring gauges don’t agree