FTM 180: Can you interchange drywall screws and wood screws?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published September 22nd, 2022 as “Can we interchange drywall screws and wood screws.” during episode 180 of Fully Threaded Radio. Hi Everyone, this is Carmen Vertullo with the Fastener Training Minute coming to you from the Fastener Training Institute and the AIM Testing […]

Continue Reading…

FTM 179: Can the sulphur % in steel be too high?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published August 18th, 2022 as “the chemical analysis requirements for SAE J429 fasteners, in particular Grade 5“, during episode 179 of Fully Threaded Radio. Hi everyone this is Carmen Vertullo coming to you from the Fastener Training Institute and the AIM Testing Laboratory […]

Continue Reading…

FTM 178: Do drawings always reduce risk?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published July 21st, 2022 as “Do drawings always reduce the risk of producing a good fastener?” during episode 178 of Fully Threaded Radio. Well, hello everyone this is Carmen Vertullo with the Fastener Training Minute coming to you from AIM Testing Laboratory, in […]

Continue Reading…

FTM 174: How tight is too tight for a Nylon Insert Locknut?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published March 17th, 2022 as “How tight is too tight for a Nylon Insert Locknut?” during episode 174 of Fully Threaded Radio. Hello everyone this is Carmen Vertullo with the Fastener Training Minute coming to you from the Fastener Training Institute and AIM […]

Continue Reading…

FTM 173: How do I install Jam Nuts?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published February 16th, 2022 as “How do I install jam Nuts?” during episode 173 of Fully Threaded Radio. Well hi everyone, this is Carmen Vertullo with the Fastener Training Minute coming to you from the Fastener Training Institute and the AIM Testing Laboratory […]

Continue Reading…

FTM 172 – are my fasteners RoHS compliant?

This edition of the Fastener Training Minute with Carmen Vertullo was originally published January 18th, 2022 as “are my fasteners RoHS compliant?” during episode 172 of Fully Threaded Radio. Well, hi everybody, this is Carmen Vertullo with the Fastener Training Minute. Coming to you from the Fastener Training Institute in beautiful El Cajon, California where […]

Continue Reading…

FTM 171: fasteners and their reuseability

This edition of the Fastener Training Minute with Carmen Vertullo was originally published December 16th, 2021 as “fasteners and their reuseability”” during episode 171 of Fully Threaded Radio. Hi everyone., this is Carmen Vertullo with the Fastener Training Minute, coming to you from the Fastener Training Institute and the AIM Testing Laboratory here in beautiful […]

Continue Reading…

FTM 170: How tight is a “snug-tite” joint

This edition of the Fastener Training Minute with Carmen Vertullo was originally published November 18th, 2021, as “How tight is a ‘snug-tite’ joint” during episode 170 of Fully Threaded Radio. Hi, everyone. This is Carmen Vertullo coming to you with the Fastener Training Minute from the Fastener Training Institute and AIM Testing Laboratory in beautiful, […]

Continue Reading…