-
Fastener Training Minute Jul 20, 2024FTM 202 – The difference between macro and micro hardness testing
What is the difference between macro hardness testing and micro hardness testing when testing fasteners?
This edition of the Fastener Training Minute with Carmen Vertullo was originally published July 20th, 2024 as "What is the...
-
Fastener Training Minute Aug 18, 2022FTM 179: Can the sulphur % in steel be too high?
There's a lot to know about chemistry when it comes to steel in bolts, but in particular sulfur is one of those things that we run into problems with.
This edition of the Fastener Training Minute with Carmen Vertullo was originally published August 18th, 2022 as "the chemical analysis...
-
Fastener Training Minute Jul 21, 2022FTM 178: Do drawings always reduce risk?
Drawings usually reduce risk, but sometimes they can increase risk if standards are not properly specified.
This edition of the Fastener Training Minute with Carmen Vertullo was originally published July 21st, 2022 as "Do drawings always...
-
-
Fastener Training Minute Apr 22, 2016FTM 104: books for your technical library
References that everyone involved in fasteners aught to have a good handle on ,and that is your fastener technical library.
This edition of the Fastener Training Minute with Carmen Vertullo was originally published April 22, 2016 as "books for your...